GEM Car Electric Motor High Torque Series
This High Torque GEM Golf Cart Electric Motor is designed for ALL GEM model carts. If you are looking for MORE torque this is the electric golf cart motor you will want! No Problem! This motor will provide approx 50% more torque than the stock motor. If you need more torque and still want reliability this is it…. All our other GEM car motors are vented to withstand higher operating temperatures and perform better yet this high torque set up is totally sealed and still have a high operating temp than OE. Rated at 5000 RPM whereas the stock GEM motor is only rated at 4000 RPM. Capable of 4100 RPM. This motor will replace the 3.5HP, 5hp, and 7hp motors no problem. Easy installation Plug-N-Play!
Hit top speeds of around 25 mph depending on tire/wheel size and pressures being used. This set up is ideal for a street cart used in hilly terrain, pulling grades or hauling goods or people. The Motor Spline count is 19 . If you are running a 4 passenger carts hauling people or pulling hills or running all terrain tires you will want this motor.
All Of Pete’s high performance GEM motors are Made in the USA! Better quality and performance then all others. More copper and more steel mean more power…. This allows for greater current flow and better thermal capabilities. Less current draw equates to better efficiency and that equals longer run time or greater vehicle range. 180 °C Thermal Rating (Class H) This high performance golf cart motor meets or exceeds the Class H thermal rating specifications. All of Pete’s Golf Cart Motors are manufactured by a team that has been doing for over 30yrs… Product defect rate is less than 1%.
Please Note – THIS MOTOR IS A DIRECT HD OEM UPGRADE REPLACEMENT!!! EASY INSTALL – NO CONTROLLER PROGRAMMING REQUIRED TO ACHIEVE. (25 MPH)
Looking for a high performance GEM Car Motor?
- Do you own a 72 volt E2 or E4 GEM Car?
- With Dana axle? ( 19 Spline Count )
- Do you want a top speed of 25 MPH?
- NO controller programming?
To Confirm this is the Best Setup for your application and performance requirements give us a call at (772) 247 – GOLF (4653) or go to our – Choosing A Golf Cart Motor Tool.
- Approx Vehicle Speed : 25 MPH
- Application – Direct Replacement – Terrain
- Performance – Torque
- Speed Enhancement : %0
- Torque Enhancement : %50
- Motor RPM :5000 Peak
- Peak HP : 15hp
- Spline – 19 Tooth (Dana)
- Additional Information: Replaces OEM Part # Advanced DC
The Small Print – Not So Small –
Golf Cart performance specs are compared to the standard factory performance. Several factors can effect the performance. Some are battery conditions; tire size, tread type and air pressure; and varying environmental conditions. Standard factory speeds normally run between 25 MPH. This information is based on a standard factory gear ratio on the cart.
If you do not know what you need but know what you want call us today and we will help make sure you order the correct set up for your needs.
Please feel free to contact us at (772) 247-GOLF or drop us a line at firstname.lastname@example.org should you have any questions. Pete’s Team is always standing by to help you! Please call direct 772-247-4653 if you are having technical problems placing your order.