36 Volt Golf Cart High Amperage Pre-Charge Resistor and Diode

$ 25.08

This 36 Volt Golf Cart High Amperage Pre-Charge Resistor and Diode designed to maintain the capacitors within your controller at battery pack voltage so when the solenoid contacts touch no arcing occurs. If you are installing a high performance motor you will need a high amp solenoid to get the power to that motor. Then you will need a pre-charge resistor and Diode. Pete says be strong and Power ON!


36 Volt Golf Cart High Amperage Pre-Charge Resistor and Diode

This listing is for one 36 Volt Golf Cart High Amperage Pre-Charge Resistor and diode. If you are in the quest for more power whether it be for more speed or torque once you upgrade your golf cart motor you will need to get more power to it from your battery bank. Hence a high amp solenoid. This powerful solenoid will require diode and resistor to keep the solenoid in good working order. This type of resistor is placed across the large power terminals of your solenoid. This resistor pre-charges the filter capacitors in your electronic speed controller which will minimizes the voltage surge across the contacts on your high amp solenoid to reduce arcing off the contacts as they close. (Without one you can expect a short solenoid life due to pitting and wear from arching as the contacts touch and power surges through the circuit.)

Closing the contactor without a pre-charge resistor causes arcing on the contact surface and they can become pitted.  Plain copper contacts experience the worst pitting and wear because thet cannot tolerate peak inrush currents.  Excessive pitting over time causes the contacts to weld together or not make a good contact.

Additional Notes: You cannot put it on the wrong way either side ring terminal to either terminal. The pre-charge circuit will draw little or no power. Resistor value is determined by battery pack voltage. Diode attaches to small terminals Silver stripe on diode will go towards positive side.

Applications: ALL 36 Volt Golf Carts. Club Car, Ezgo and Yamaha PLEASE NOTE:

Electric DS Model Club Car Golf Carts made from 1990 to Present Electric Columbia Golf Carts made from 1990 to Present Electric E-Z-GO Golf Carts & Utility Vehicles made from 1989 to Present.  This includes the 3 and 4 wheel, 2, 4 and 5 passenger Marathon, Medalist, TXT and Coastal Fleet Golf Carts, the 300 and 500 Turf Trucks, the 300, 500, 640, 775, 800, 835, 875, 881 and 1000  Industrial Vehicles, the Stock Chaser, the PC Series, the BC Beverage Carts, the Shuttle Series, the 800 Hauler, the 1000 Workhorse Utility Vehicles, the 800 Multi Purpose Trucks (or MPTs), the Cushman 280 and 2100 Commanders as well as the Cushman Titan. Electric G8-G16 Model Yamaha Golf Carts. Electric Jacobsen Golf Carts with speed controllers made from 1990 to Present. Including the Jacobsen 1110 Hauler. Factory Part # 556295 Electric Melex Golf Carts.

Pete Says… “Building a Car, Boat, Motorcycle or even a Golf Cart – I want to make it better than new, Performance on all systems involved! So if I am going to do it – I am gonna do it right!” 
Should you have any questions or not sure this Golf Cart High Amp Solenoid will work with your application. Please feel free to contact us at 888-531-7383  should you have any questions or if you are having technical problems placing your order. Pete’s Team is always standing by to help you! 


Additional information

Weight 0.1 lbs
Dimensions 3 × 1 × 0.3 in