Replacement Valve (VB-TBU) – BWT- Battery Watering System
Any Battery Watering system is designed to give you a system that allows for quick and easy maintenance of your Lead acid battery system. It is accomplished by replacing the battery’s existing vent caps with valves that are interconnected with tubing, allowing the user to fill all cells of the battery from a single remote location. Snap on/snap off water connections turn the often ignored task of watering batteries into a quick, simple task taking 30 seconds or less! Each valve independently shuts off water flow to the cell when the proper electrolyte level is reached, allowing the batteries to be filled perfectly every time without having to look at the batteries. Not sure if this is the correct valve for your system? Checkout this Valve Guide Chart on Pete’s Blog to Confirm.
Standard Features of the BWT Battery Watering Systems Valve Design:
Tubing Barbs – The tubing barbs eliminate the need for clamps, and they are angled to make installation easy in tight configurations.
Z-Lock – The z-Lock feature integrates the tee piece with the valve for added strength.
Indicator Eye – This unique indicator eye is visible from the top and side. It confirms proper operation of the valve.
Low Profile Design – The valve design reduces the risk of damage from battery cables.
Clip-in Base – Installation is fast and easy: Gently push the valve into the vent well to install. No twisting is necessary to lock the valve in place.
One Piece Floats – Acid, temperature and impact resistant float is solidly constructed and cannot absorb water.
Encapsulated Float – Reinforced encapsulation protects the float and eliminates interference with internal obstructions.
Spark Arrestor – The spark arrestor prevents flames or sparks from entering through the battery vent opening.
If you do not think this is the specific valve designed for your application give us a call! The BatteryPete Team is here to help you. Call (772) 444-2280 to double check stock and availability.